Journal / Care
Mould in bathroom spaces: clean it safely, then stop it coming back
Words by the Bathroom Edit editor · Updated on 8 October 2026 · 5 min read

NSW Health advises cleaning light mould with mild detergent or diluted vinegar, and stubborn mould with diluted bleach (250 ml in 4 litres of water), wearing PVC or nitrile gloves and safety glasses, with the room ventilated. Then deal with the cause: run the exhaust fan when showering, open windows, and fix leaks.
To clean bathroom mould, NSW Health advises mild detergent or a diluted vinegar solution for light growth, and diluted bleach, 250 ml in 4 litres of water, for stubborn growth. Wear PVC or nitrile rubber gloves and safety glasses, and ventilate the room while you work. Mould comes back unless the moisture behind it is dealt with, so the lasting fix is better ventilation and repairing any leak.
Who should not do the cleaning
NSW Health notes that mould spores can cause problems for people who are sensitive or allergic to them, including nasal congestion, eye and skin irritation and wheezing, and that people with asthma are at particular risk of an attack. People with asthma, allergies or breathing conditions, weakened immune systems or chronic lung disease are more vulnerable. If that is you, ask someone else to clean, and stay out of the room while they do.
Cleaning it, step by step
| Step | What to do |
|---|---|
| 1. Protect yourself | PVC or nitrile rubber gloves, safety glasses, covered arms; open the window and run the exhaust fan |
| 2. Start mild | Wipe light mould with mild detergent in water, or NSW Health's vinegar solution |
| 3. Step up if needed | If a surface cannot be discarded and mould remains: follow NSW Health and the product label for diluted bleach (its fact sheet gives 250 ml in 4 litres). Never add bleach to a surface carrying vinegar or another cleaner |
| 4. Never mix products | Do not mix bleach with vinegar or other cleaners; the combination can release harmful gas |
| 5. Dry the surface | Wipe dry and keep the room ventilated so it dries quickly |
Mould or staining in grout and silicone needs its moisture source assessed before a cosmetic repair. Replacing a damaged joint may be part of the repair, but it does not fix a hidden leak. Do not choose a darker finish merely to conceal recurring growth.
When it is a bigger problem
Surface spots on a ceiling or grout line can indicate persistent moisture; appearance alone does not establish its source. These signs point to water getting somewhere it should not:
- Mould that comes back quickly in the same place despite good ventilation
- Soft, swollen or lifting paint and plaster, especially on the other side of the shower wall
- Loose or drummy tiles, or cracked grout in the shower
- A musty smell from a cupboard or room next to the bathroom
These can mean a leaking pipe or failed waterproofing, which needs a licensed plumber or waterproofer to find and fix. NSW Health suggests an occupational hygienist for specialist testing when the source cannot be found or the mould persists despite prevention.
Stopping it coming back
NSW Health's prevention advice is to run exhaust fans while bathing, open windows for cross-ventilation, and repair leaks promptly. In practice:
- Run the exhaust fan every shower, and after. If the bathroom has no window, the building code now requires the fan to run on for 10 minutes after the light is switched off in new work.
- Make sure the fan goes outside. Fans that blow into the roof space move moisture into the ceiling instead of out of the house.
- Squeegee walls and screens after showering so less water evaporates into the room.
- Leave the door open after showering to let air move.
- Wash or replace bath mats and shower curtains regularly.
Designing it out in a renovation
If you are renovating, the surfaces and layout make a difference. Fewer grout lines, from large-format tiles or a jointless finish such as microcement, leave fewer places for mould to start. A window or skylight adds daylight; it provides ventilation only if it opens or has a suitable ventilation arrangement. And a properly ducted exhaust fan, sized to the code's 25 litres per second for a bathroom, does more for mould than any cleaning product.
Where mould grows in bathrooms
Mould grows where moisture sits and air does not move: the ceiling above the shower, the corners of the room, grout lines and silicone in the shower, behind the toilet, under the vanity, on window frames and around the exhaust fan grille. Black spots in silicone usually mean mould has grown into the sealant itself; cleaning lightens it, but replacing the silicone is the lasting fix.
Products for cleaning mould
For hard, non-porous surfaces such as tiles and glass, a household mould cleaner or a diluted vinegar solution can work; follow the label, ventilate the room and wear gloves and eye protection. Never mix cleaning products, especially bleach-based products with ammonia or acids, because dangerous gases can form. Porous surfaces such as plasterboard and timber that are heavily affected may need replacing rather than cleaning.
Mould and health
Mould can trigger allergies and asthma and irritate eyes, skin and airways, especially in children, older people and anyone with lung conditions or a weakened immune system. People in these groups should not clean large areas of mould themselves. If anyone in the house has symptoms that seem linked to mould, talk to a doctor.
Mould in rentals
In a rental, tenants usually need to ventilate and keep surfaces clean, while landlords are responsible for repairs, including leaks, failed waterproofing and broken exhaust fans. NSW rental rules include minimum standards for properties, and some states have specific mould rules. Report mould and its likely cause to the landlord or agent in writing, with photos.
Quick prevention checklist
- Run the exhaust fan during and after showers.
- Open a window when weather allows.
- Squeegee the shower walls and glass after use.
- Hang towels to dry outside the bathroom or on a heated rail.
- Keep the room warm enough in winter to reduce condensation.
- Fix leaks and replace failed silicone quickly.
Our short answer
Clean small areas of bathroom mould safely with ventilation and protective gear, replace mouldy silicone, and fix the cause: run an exhaust fan ducted outside, dry surfaces after showering, and repair leaks. Large or recurring mould, or mould behind walls, needs a professional.
When to call a professional
Call a professional for mould covering a large area, mould that keeps returning quickly, mould behind tiles or inside walls, or mould with a musty smell from a hidden source such as a leaking pipe.
Mould and paint
Repainting over mould without cleaning and fixing the cause only hides it for a while. Clean the area, let it dry fully, then use a primer and a mould-resistant paint made for wet areas.
Mould on grout
Mould in grout lines often returns because grout is porous. Clean it with a suitable mould cleaner and a soft brush, then seal the grout. Badly stained grout can be raked out and regrouted, or replaced with epoxy grout that resists staining.
Mould on ceilings
Ceiling mould above the shower usually means steam is not being removed. Clean the ceiling, then improve ventilation before repainting with a mould-resistant ceiling paint.
Mould in windows and frames
Condensation on window glass runs down to the frame and sill, where mould grows. Wipe condensation away after showers, keep the window open a little when weather allows, and clean frames regularly.